oil type AUDI A4 1995 B5 / 1.G Engine Oil Level Checking Workshop Manual

81

Service
Type Adaptation
channel Specification
Entry
OIL 05 12000 km 00012
In 1
(distance) 06 24000 km 00024
In 1 (time) 07 365 days 00036
In 2 08 730 days 00073
Pa
ge 82 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6

82
The following service types should be adapted
depending on the inspections performed.

Inspection
performed Service type to
be adapted Adaptation
channel
Delivery
Inspection OIL
In 1 (distance)
In 1 (time)
In 2 05
06
07
08
OIL OIL 05
In 1 OIL
In 1 (distance)
In 1 (time) 05
06
07
In 2 OIL
In 1 (distance)
In 1 (time)
in 2 05
06
07
08
Pa
ge 83 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6

89

Oil Change Service and Inspection Service
When a service is due, the type of service
required will be indicated by a flashing message
on the trip recorder display when the ignition is
switched on. The message will continue to flash
for up to 60 seconds after the engine has been
started.
Display
Type of service due
service OEL Oil Change Service
service INSP Inspection Service
When a service is due, this will be indicated
either 1,000 km or 10 days in advance.

Resetting service interval display with VAG
1551

- Connect VAG 1551 Page 83
.

- Switch ignition on.VAG On Board Diagnostic
HELP
1 - Rapid data transfer1
)
2 - Blink code output1
)

Indicated in display (
1) appears alternately)
- Enter "1" to select "Rapid data transfer".
Pa
ge 90 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6

90

Rapid data transfer
HELP
Select function XX

Indicated on display
- Enter "17" to select address word "Instrument cluster" and confirm
entry with Q key.
8D0919860G B5 Instr cluster VDO D09 Coding 00042
WSC 12345

Indicated on display (example)
-
Press key twice.- Enter "10" to select the function "Adaptation" and confirm entry with Q
key.
AdaptationFeed in channel number XX

Indicated on display
- Enter "02" to select adaptation channel 02 and confirm entry with Q
key.
Channel 2 Adaptation 11 - - -

Indicated on display
The type of service will be indicated (example: 11)
0 - means no service is due
1 - means that an Oil Change Service is due
10 - means that an Inspection Service is due
11 - means that both and Oil Change Service and an Inspection
Service are due
-
Press key.
Pa
ge 91 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6

91

Channel 2 Adaptation 11 QEnter adaptation value XXXXX

Example: Indicated on display
- Enter appropriate adaptation value for type of service which has been
performed. The values are as follows: Adaptation value
Type of service cancelled
00000 Delivery inspection
00000 service OIL and service INSP
00010 service OIL
00001 service INSP - Enter "00000".
Channel 2 Adaptation 11 QEnter adaptation value 00000

Indicated on display
- Confirm entry with Q key.
Channel 2 Adaptation 0 Q- - -

Indicated on display
- Confirm entry with Q key.
Channel 2 Adaptation 0
Q
Store chan
ged value?

Indicated on display
- Confirm entry with Q key.
Channel 2 Adaptation 0 Chan
ged value is stored

Indicated on display
Pa
ge 92 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6

92

Resetting service interval display with
adjustment buttons for trip recorder and
clock.

- Switch ignition off.

The trip recorder display -3- will read "service OIL".
Note:
Depending on the make of the instrument cluster, the display on the trip
recorder will either continue to read "service OIL" (Nippon Seiki) or
change to "- - -" (VDO).
The trip recorder display -3- will read "service INSP". - Press trip recorder reset button -2- on instrument cluster and at same
time switch ignition on.
- Release button.
- Pull clock adjuster button -1- on instrument cluster and hold for approx.
2 seconds. This resets "service OIL" display.
- Press trip recorder reset button -2- again to advance to next type of
service.
- Release button.
Pa
ge 94 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6